The solutions of touch machines
IPC touch all-in-one machine can be used in a variety of occasions, such as conference rooms, classrooms, industrial and commercial inquiries, airports, stations, etc. In fact, in addition to these conventional places applied to it, other embedded projects can also use IPC touch all-in-one machine. It has a high degree of convenience and efficiency. In the process of use, there will inevitably be some failures, such as the inability to display the screen, can not open, etc.. IPCs are mainly used in industrial sites related to production and manufacturing, such as continuous production, intermittent manufacturing and batch processing.
The IPC touch panel monitors and controls the production process in real time, giving a quick response when changes in working conditions occur, timely acquisition and output adjustment, and self resetting in distress to ensure the normal operation of the system. Industrial touch all-in-one machine with rich I/O interfaces and a variety of expansion slots, and industrial sites with a variety of peripherals, boards and cards connected to complete a variety of tasks. In the industrial site, industrial control touch all-in-one machine using a complex environment, such as dust, high-frequency vibration, etc., may cause industrial control touch all-in-one machine failure. When encountering industrial touch all-in-one machine can not start, so we should how to solve?
Industrial touch one machine start without any response, industrial motherboard indicator light does not light, the power supply fan does not rotate.
First of all, we should check the industrial control touch one machine power supply is normal. If the power supply is normal,we can consider whether the industrial control touch one machine power supply failure. Use tweezers or wire to short-circuit the green and black wires of the ATX power connector. If the power supply fan of the industrial touch all-in-one machine can work normally, it means that the power supply is not faulty. At this point, we should consider whether the industrial motherboard is faulty. Remove all the external devices on the industrial motherboard, leaving only the memory, hard disk, and then start the industrial touch machine to see if it can run normally. If not, we can remove the memory to see if the alarm; then check the work of the CPU, whether normal; finally replace the industrial motherboard, check whether the industrial motherboard has a short circuit or burned.
Second, industrial control touch all-in-one machine start, the power supply fan can run, but can not work properly. If the industrial control touch one machine start with a warning sound, check whether the memory is loose, reinsert the memory or replace the memory to see if it can run normally. If not, replace the industrial motherboard.
Industrial control touch one machine start without warning sound, CPU fan running normally, but it can not be normal initialization, the industrial motherboard should be analyzed whether there are accessories on the short circuit or industrial motherboard burned.
Industrial touch one machine start without warning sound, CPU fan rotation will stop, so repeat, consider power supply problems or CPU loosening. You can plug and unplug the power supply again, to the industrial motherboard discharge, clear the CMOS, reinstall the CPU again. When the industrial touch one machine start, stay in the system initialization start interface, can not be the next step. At this point, check the peripheral part to see if there is a U disk and other U disk device access. Remove the relevant equipment and restart, industrial touch all-in-one machine can run normally.
We provide commercial display and special TV system solutions for various industries, and are also a one-stop service provider of outdoor advertising machine, splicing screen. Customized provider.