Common faults of queuing system

Common faults of queuing system

Common faults of queuing system

Queuing system all in one pc is a display device that integrates display screen and touch control. It is now widely used in retail service industry, municipal administration, public places, financial institutions and other occasions, becoming a typical representative of human-computer interaction. However, the touch all-in-one machine itself is a display device with LCD display screen as the mainstay. In addition to its touch function, the fault and breakage rate are relatively high relative to other advertising machines. Then there is a question about the fundamental fault. , How should users usually respond?

1. Malfunctioning scene: long response time

Touch the dark ground of its display with a finger, and it takes a long time to get a response.

Problem analysis and solutions

It is possible that there are moving water droplets on the queuing machine, just wipe it with a dry soft cloth. It is also possible that the host equipment is too low, such as the clock frequency is too low, if due to this situation, it is best to replace the host.

2. Malfunctioning scene: Partially no response

Touching the display screen with a finger darkly, partly there is no response.

Problem analysis and solutions

It is possible that the reflective stripes of the queuing system are partially covered. You can scrub it with a dry soft cloth. It is also possible that part of the reflective stripe is scraped off by a hard object. In this case, the advertising player cannot be corrected and can only be returned to the manufacturer for processing by the manufacturer.

3. Malfunctioning scene: the computer cannot operate under normal system

The queuing system itself is all normal, but after connecting to the host, the computer cannot operate.

Problem analysis and solutionsIt is possible that before the host starts loading the queuing system driver, the queuing system control card receives the operation signal, and only needs to restart the computer after the power is turned off from the beginning. It is also possible that the version of the queuing system driver is too low, and the latest driver needs to be installed.

Deja un comentario

* Campos requeridos

Tenga en cuenta: los comentarios deben aprobarse antes de que se publiquen.